|
High quality HDMI TO HDMI players:
Reg Price $99 price with dvd player
$29.00 |
|
High quality HDMI
TO DVI players:
Reg Price $129 price with dvd player
$29.00
|
|
High quality Gold plated Component
Cables
Reg Price $49 price with dvd player
$24.50 |
Denon's DVD-2930CI is the newest
player to compliment any High End Home theater
system. It is guaranteed to deliver attention
grabbing picture and sound quality. Its rock
solid, three-layer design and aluminum front panel
fight vibrations that will intrigue any Audio
Video Enthusiast. Denon built the audio and video
circuit boards into separate blocks to prevent
interference and keep signals as clean and pure as
possible.
The 2930CI's advanced video
circuitry makes its picture truly an amazing
sight. With it's powerfull new Silicon Optix video
processor transforms DVD signals into
progressive-scan images on a pixel-by-pixel basis
for sharp, clear detail.
Details:
|
| - |
Code
Free DVD player will play region 1,2,3,4,5,6
or any other region dvd movies |
| - |
selectable 480i/480p/720p/1080i/1080p output
via
HDMI digital interface (separate adapter
available for TVs with DVI input) |
| - |
BUILT IN 64 MB PAL <-> NTSC VIDEO CONVERTER
Play any DVD on ANY TV |
| - |
Silicon Optix Reon-VX50 10-bit video processor |
| - |
optical and coaxial digital outputs for Dolby
Digital/DTS/PCM |
| - |
1 set
of A/V outputs (composite, S-video, 480i/480p
component video) |
| - |
RS-232C port for third party controllers |
| - |
plays
DVD-Video, DVD-R & DVD-RW, DVD+R & DVD+RW, and
DivX® (version 6.0) discs |
| - |
plays
SACD, DVD-Audio, CD, CD-R & CD-RW, and MP3 and
WMA CD-R & CD-RW |
| - |
plays
digital picture CD (JPEG), Kodak Picture CD,
and Fujifilm Fujicolor CD |
| - |
8MB
buffer for quick layer change |
| - |
Noise
Shaped Video™ reduces noise in the video
signal |
| - |
PC-compatible format scaling (VGA, XGA, WXGA,
SXGA) |
| - |
digital bass management (selectable low-pass
crossover) |
| - |
SRS
Virtual Surround |
| - |
Denon
Link digital output passes Dolby Digital, DTS,
DVD-Audio, and SACD signals to compatible
Denon receivers |
| - |
AL24
Plus sound processing |
| - |
HDCD
decoding |
| - |
lip
sync correction |
| |
|
-3-block, 3-layer design |
|
-Dolby® Digital and DTS® decoding with 5.1
analog audio output |
| -HDMI
version 1.1 |
|
-remote control |
| -dual,
discrete 216MHz/12-bit video DACs |
|
-dual Burr-Brown PCM-1791 192kHz/24-bit
audio DACs |
|
17-1/16"W x 4-1/16"H x 16-7/16"D |
|
Audiophiles
will appreciate Denon's AL24 Plus processing,
which brings out all of the nuances in your music
with optimum clarity. Denon Link allows this DVD
player to pass SACD and DVD-Audio signals to a
compatible Denon receiver. This is a noise-free
connection, so you'll get uncompromised sound with
your high-resolution audio discs. The DVD-2930CI
also does a great job with regular CDs and those
loaded with MP3 and WMA (Windows® Media Audio)
files.
Denon
Link (3rd Edition): The DVD-2930CI has an
RJ-45 Denon Link 3rd Edition output. Through the
Denon Link, the DVD player can transfer 6-channel
96kHz/24-bit or two channel stereo 192kHz/24-bit
DVD-Audio signals, as well as 2-channel and
multi-channel SACD signals, digitally to a
receiver. Because the signal transfer is balanced
and the voltage is lower than coaxial or
unbalanced cables, the Denon Link is far less
susceptible to radiated noise, which helps to
ensure the highest level of signal transfer. Denon
Link 3rd Edition uses a different signal from
Denon Link S.E. (Second Edition). Because of this,
the Denon Link 3rd Edition signals are only
compatible with A/V receivers that are Denon Link
3rd compatible. In the Digital Interface Setup,
you can select the type of signal output through
the Denon Link jack: 3rd, 2nd, or Off. If the unit
is set to 2nd Edition signals, there will be no
output from an SACD.
HDMI:
The unit's HDMI jack passes both digital video
and audio using a single cable. HDMI Version 1.1
is compatible with copy protected DVDs with HDCP
and CPPM (Content Protection for Pre-recorded
Media/used in DVD-Audio), which was not the case
with version 1.0. You can select the type of video
signal output by the HDMI jack: 480i/576i,
480p/576p, 720p, 1080i, or 1080p.
10-Bit
I/P Converter: Conversion from interlaced to
progressive (I/P Converter) video is accomplished
using a 10-bit converter developed by Silicon
Optics and Denon. This 10-bit processing offers
high conversion performance and dramatically
improves motion detection capability.
Multi-Directional Diagonal Filter (MDDF): MDDF
detects and corrects at a pixel-level the
directionality of lines, avoiding the "jaggies"
often seen in supposedly straight diagonal lines.
Denon
Pixel Image Correction (DPIC): Also built on a
10-bit platform, DPIC's pixel by pixel correction
compares nine different pixels of adjacent video
data for each pixel correction. Luminance and
chroma signals are also processed to suppress
ringing noise and other artifacts.
Video
Scaler: The video scaler upconverts standard
DVD signals to HD-compatible 720p, 1080i, or
1080p, and passes it through the HDMI output.
Upconverted signals are not passed by the
component video outputs.
Dual
Discrete Video Circuit (DDVC): Isolated video
circuits for interlaced and progressive signals
improve video precision.
Video D/A
Converters:
The DVD-2930CI uses a 12-bit, 216-MHz video D/A
converter to tap the maximum potential DVD has to
offer. This converter provides a high sampling
frequency of 216-MHz, with 8x oversampling for
Progressive video and 16x oversampling for
Interlaced video, resulting in the most detailed
D/A conversion.
Noise
Shaped Video (NSV): The NSV feature works in
the digital domain to reduce noise in the video
signal frequency band, improving video signal to
noise ratio and enhancing video signal linearity.
HDCD
Decoder:
HDCD (High Definition Compatible Digital) is a
digital audio recording technology, compatible
with the conventional CD format. It significantly
reduces distortion during recording to expand the
dynamic range and realize higher resolution than
standard CD. The HDCD decoder allows the
DVD-2930CI to play discs that have been recorded
in HDCD format and to bring out superior sonic
performance from these discs. Combined with
Denon's advanced audio technology, the DVD-2930CI
masterfully reproduces HDCD's rich dynamic range
and beautiful sound quality.
Speaker
Configuration:
During the initial
set up it is possible to set the speaker size,
distance, and crossover point. The crossover point
for bass management can be fixed at 40, 60, 80,
100 or 120 Hz.
Multi-channel DVD-Audio Playback: DVD-Audio is
a multi-channel format used for high resolution
audio recording. This unit can decode and play
DVD-Audio discs with a sampling rate up to 192 kHz
with a 24-bit word length.
SACD:
Unlike PCM based technology (CD/MiniDisc/DVD/Audio
DVD, etc.), Super Audio CD is based on
Direct Stream Digital
(DSD) encoding, which does not require
decimation and interpolation filters. DSD is much
simpler and enables a 1-bit signal to be recorded
directly. DSD encodes music at 2,822,400 samples
per second (64 times that of standard CD) allowing
you to hear sound with incredible detail and
clarity. DSD combines the advantages of digital
recording with the best characteristics of analog
sound. The DVD-2930CI unit will play 2-channel and
multi-channel Super Audio CDs. During SACD
playback, the optical digital and coaxial outputs
do not operate. The Digital Link 3rd output or
analog outputs must be used to listen to SACDs.
AL24
Processing for All Channels:
Denon has further developed its proprietary AL24
Processing, an analog waveform reproduction
technology, to support the 192 kHz sampling
frequency of DVD-Audio. This new technology, AL24
Processing Plus, thoroughly suppresses
quantization noise associated with D/A conversion
of LPCM signals to reproduce the low-level signals
with optimum clarity. Additionally AL24 expands
original PCM 16-bit recordings to 24-bit word
length using interpolation algorithms developed by
Denon. The result is a more natural reproduction
of spatial information and clarity that will bring
out all the delicate nuances of the music.
Pure Direct
Mode:
The DVD-2930CI includes two Pure Direct modes that
further improve sound quality. During analog audio
output, Pure Direct can turn off digital signal
outputs, video signal outputs, and the front panel
display, which can easily influence the sound
quality of the analog audio signals. You can
define which operations are to be turned off and
store those preferences in memory.
MP3/WMA
Playback: This unit will play MP3 files
recorded onto CD-R and CD-RW discs using the ISO
9660 level 1 format (128 kbps and faster
recommended). Windows Media Audio (WMA9) is also
supported using a compression rate from 64-160
kbps.
JPEG Disc
Playback:
JPEG files stored on CD-Rs and CD-RWs can be
played as a slide show and enjoyed on your TV
using the DVD-2930CI. Kodak picture CDs and
Fujicolor CDs are also supported. During slide
show playback, you can rotate an image 90-degrees
clockwise or counterclockwise, flip an image
vertically or horizontally, or zoom in on an
image. In addition, you can play the pictures in
random order.
Surround
Sound Processors: Along with the multi-channel
processors for DVD-Audio and SACD, Dolby Digital
and DTS surround decoders are built in.
Picture
Zooming:
During DVD-Video and Video CD playback, you can
enlarge the picture by 1x, 2x, or 3x. You can then
use the cursor buttons to move the enlarged
viewing area up, down, left, or right.
Markers:
Up to 8 points on a DVD-Video disc can be
stored in memory and easily recalled. Markers are
automatically cleared when the power is turned off
or when the tray is opened.
Resume Function:
The Resume function allows the player
to remember the point where you stopped play.
Playback will resume from the point stored in
memory. The stopping point is cleared if the tray
is opened or the stop button is pressed a second
time.
Auto
Power-Off: If the unit is in stop mode for
approximately 30 minutes, it will automatically
switch to standby mode.
Dimmer:
The display can be adjusted to one of three
brightness levels, or the display can be turned
off.
Inputs and Outputs Notes
Denon
Link (3rd Edition): Using the supplied Denon
Link cable this DVD player is connected to a Denon
Link 3rd or S.E. compatible receiver.
5.1-Channel Audio Outputs: The DVD-2930CI
offers multi-channel analog output for DVD-Audio,
DVD-Video and SACD playback.
2-Channel
Audio Outputs: In addition to the 5.1-channel
Free technical
support for life